Monday, December 30, 2019

5 Field Trip Ideas for Elementary School

Field trips are a wonderful way for children to connect what they are learning in class to the outside world. For instance, if you are teaching your students about dinosaurs, the best way to wrap up the unit is to bring the class on a field trip to your local dinosaur exhibit at the museum. This way they can get a hands-on view of everything they learned and help them connect what they learned to what they are seeing at the exhibit. Here are 5 fun and exciting educational field trip ideas for your elementary school class. Post Office A field trip to your local Post Office is a great way for students to compare the history of the postal service with the technology they use today. Students will leave the Post Office with a better understanding of how the mail connects everyone in the world. Pick Your Own Farms A unique field trip idea is to take students on a trip to pick their own fruits and vegetables. Children will be exposed to agricultural topics and experience nature and how food grows. A hands-on trip to your local farm is the perfect way to end your nutrition unit. Bank What child isnt fascinated with money? If you want to see your students participate in class and really be engaged, then take them on a field trip to your local bank. Children are always asking, Why do I have to learn math? and When I am really going to use these math skills? Well, a trip to the bank will show your students how the math skills they are learning in school can be applied to everyday life when they grow up. Bank tellers can show students how to write a personal check and withdrawal slips, and how to open a bank account and use a debit card. The information they learn on this trip will help them realize how important paying attention in math really is. A fun idea beforehand is to teach students about PayPal and how with technology today you can send money online. Grocery Store With the child obesity rate as high as it is today, the local grocery store is a great place for a field trip. There are a variety of topics that can be focused on at the grocery store, like nutrition, math, health and wellness, and home economics. Children can learn about healthy food choices and go on a food scavenger hunt. They can study measurements and, on the day of the trip,  buy appropriate ingredients for a specific recipe you give them. They can learn how to budget their money, group foods into food groups, and learn important life skills. Amusement Park How is a field trip to an amusement park educational? Students can determine the speed of roller-coasters or see behind the scenes of how a stage show works. Students can learn about the animals in the on-site zoo, or see how the actors transform into characters. A field trip to an amusement park can take some of the concepts students are learning in school into a real-world experience. Additional Field Trip Ideas Worth Considering Here are a few more field trip ideas that are worth thinking about it. Any of the following ideas would make for a perfect field trip with your students: Water parkBakerySkating RinkLocal HospitalMoviesCollegeTV StationNewspaperAquariumZooBotanical GardensTrain RideSoup KitchenLocal FestivalNursing HomeLocal MonumentFarmers MarketMuseumA Virtual Field Trip

Sunday, December 22, 2019

Lets View Globalization - 1213 Words

The definition of Globalization can be summarized as an elimination barrier of trade, culture and communication. Increasing technology and communication has supported the growth of globalization creating a world without many borders related to business (Robertson 1996). Viewing globalization as a positive or negative contributor to the world economy is part of the same debate of whether it creates diminishing cultural and ethnic diversity .The debate around globalization has been a topic of discussion around the world and will continue to be as further advancement in areas of communication and technology continue. Both are important topics in the contemporary world and this paper will review both arguments to support or challenge the implication globalization is having on nationalism as it relates to modern society. Increasing technologic advancements continue to generate more opportunities for globalization to expand globally. However the dominance of globalization and the effects it has on cultures has created groups focused on fighting the expansion of globalization (Godfrey, 2008). According to Giddens, â€Å"Globalization is identified as the intensification of worldwide social relations which links distant localities in such a way that local happenings are shaped by events occurring many miles away and vice versa.† (Giddens, 1990). The ideology of globalization is not a new concept but over time it has taken on different changes such as the size, speed, and awareness.Show MoreRelatedBenefits Of Globalization On Jobs891 Words   |  4 PagesOne of the main benefits of globalization is that it helps to develop trading amongst nations. Some may think that trade causes loss of jobs and believe that we should be more self reliant on our own production of goods. But, what they may not understand is trade comes with added benefits. To date the United States is the largest trading nation in the world. â€Å"Most imports have a lower cost and higher quality, and that improves our standard of living† (Marotta, 2003). It is the competitive pressuresRead MoreThe Link between Violent Video Games and Behavior1230 Words   |  5 Pagesabout following this rule if they visited India, it is unfair for Indians. Call now to 1-800-123-4567 to take a part in stopping this unfair Indian tradition. South Asia. A place of mysteries and wonders. What are we going to teach you about today? Let’s start with India... and America. Although they seem like two completely different countries, there was one similarity: Gandhi and Martin Luther King Jr.. Born on October 2, 1869, Gandhi became the leader of India’s Independence Movement. He plannedRead MoreA Globalization Strategy Global, Multinational and International strategies aggregated together as900 Words   |  4 PagesA Globalization Strategy Global, Multinational and International strategies aggregated together as three pillars of A Globalization Strategy or can define A Globalization Strategy. These three pillars of A Globalization Strategy empower an organization to achieve its designed-aim for an international expansion. In developing A Globalization Strategy PEST analysis comes into play. According to PEST analysis the environmental scrutiny of political, economic, social and technological aspectsRead MoreAnalysis Of The Article Case For Contamination 1410 Words   |  6 PagesMedgina Jasmin REL 2011 Case for contamination Review If we were to lay the topic â€Å"effects of globalization† on the table, what assumptions might arise? Well, one might point out whether globalization can be considered as a positive thing or negative thing towards different cultures. The article â€Å"Case for contamination† gives insight on the author’s views and arguments towards globalization and how that intertwined with the people in Ghana. The author of the article named Kwame Appiah who isRead MoreDrivers and Consequences of Globalization Essay examples1106 Words   |  5 Pagesdrivers of globalization and how these drivers impact organizations, describe the risks associated with global investing and explain the importance of cultural sensitivity and ethics in global finance. Global Finance Environment Globalization is the increasing interconnectedness of economies, markets, and people across nations. Increasing globalization creates additional competition from around the world, which then affects both local jobs and company profits. Globalization also hasRead MoreSustainable Development and Globalization Are Two Popular Concept with Respect to Present Context. Is Globalization Is a Threat for Sustainable Development ?1031 Words   |  5 Pagesbut also for future generations. [pic] A representation of sustainability showing how both economy and society are constrained by environmental limits [pic] Scheme of sustainable development: at the confluence of three constituent parts â€Å"Let’s see the three overlapping circles: one representing environmental needs, one representing economic needs, and one representing community social needs. The area where the circles overlap is the area of sustainability, the area of livability – the areaRead MoreIs Globalization Diminishing The Presence Of Nationalism?1334 Words   |  6 Pages2014 Is Globalization Diminishing the Presence of Nationalism? As a kid I was taught to question everything and to think for myself. For that reason, I questioned how the world operates. During my time, globalization has been the major factor contributing to changes in our society. We are slowly becoming a close nit network of countries with the common goals of becoming a world superpower, financially rich, and multicultural. The modern world has seen a dramatic increase in globalization such asRead MoreCriminal Justice Trends Essay1572 Words   |  7 Pageswell together and the process of suspected criminals is as flawless as it can be; the way society views the efficiency and perceives the criminal justice system is very important. Public opinion has always been important to criminal justice officials as well as politicians. The way the system is perceived is by citizens of America plays a large roll on how policies are implemented. What shapes the views and perceptions of our citizens when discussing the criminal justice system? There are four outletsRead MoreImpact Of Globalization On The World1244 Words   |  5 Pageshave access to similar services and products. Let it be fashion, entertainment of even food. Everybody is adopting similar habits. That’s the power of globalization. Globalization is the process by which the world is interconnected through technology and powerful infrastructure for the purpose of communicating and managing resources. Globalization seems to talk about several vibrant phenomena which ensure two major components. Firstly, they function across national boundaries and secondly, they resultRead MoreThe Impact Of Management On The Globalization Of Business849 Words   |  4 PagesThis essay is about the impact of management on the globalization of business. The impact of management will be on the following management topics: the multinational corporation; culture shock experienced by managers who work abroad; fair trade issues; ethical issues faced by managers in dealing with international business; the difference managerial styles in selected countries (for example Japan vs. the U.S. or Saudi Arabia vs. the U.S.); and the managerial culture of a selected country. Before

Saturday, December 14, 2019

Issues of Youth in Pakistan Free Essays

ISSUES FACED BY YOUTH IN PAKISTAN Youth, in this era of modern technology, is facing problem all over the world. But especially in developing countries of the world like Pakistan our youth is helpless and are growing up without clear goals and ideals. Of the 15 largest countries in the world in terms of population size, Pakistan has the largest population of the youngest people. We will write a custom essay sample on Issues of Youth in Pakistan or any similar topic only for you Order Now In one’s mind this question may arise whether such a large population be regarded as a burden or an asset for country. But in my view such a large population could prove itself an asset towards the country. This demographic situation provides our Pakistan’s youth with an extra ordinary opportunity that because of such a large young population our country could compete even with the developing countries of the world, then how could this population be designated as a burden. Particularly when we talk about the young people of Pakistan then we will get to know that our youth counter through number of issues from their education period up till their settlement in life. Hardest of all the time is the duration of their career making. Unemployment is the major issue confronted by our youth. Today 12% of our youth is unemployed. Most of the educated students such as degree holders of Bachelors and Masters have no value in national or international market now. These unlucky guys are delivering pizzas and doing other door to door services. Some of them are so unlucky that they don’t even get such kinds of job too. Another prejudice being done every day to our youth is favoritism. It is processed in every organization of our country from lowest to highest level. Students who belong to any political parties or are far relatives of any high post officials they get job easily within few hours without any struggle. Although they are impotent for that job, and because of this brilliant students are deprived of their right. Another problem being faced by our youth is flawed education system in our country. There is no unification in education system. 3 to 4 systems are running at a parallel level. Students of private educational institutions such as NUST and LUMS are being taught entirely in different way as students of government institution are taught. Most of the students are misfit in their positions. They are not satisfied with their careers and jobs. Those who wanted to become engineers they are in medical colleges and vice versa. The reason behind this is improper education counseling. They are not guided properly and many of them are enforced by their parents to join particular field. In developed countries students are being counseled after regular intervals for their better future but there is no such system in our country which could recognize the true talent of our own students. Our youth has lost its identity. Western and Indian culture has submerged gradually deep in our roots and are targeting our youth. They are easily targeted because they are far away from their own religion and culture and due to this they are lost in the blind end of street. Dilemma of our youth is that they are talented and are capable enough to compete with the students of other countries but they are getting no chance to show their inner talents. Their talent is not being utilized in proper way. Their energies are used by political parties for their own sake. Negative role of media is another factor which is exploiting our youth. Youngsters are running in a race to copy the latest fashion as soon as possible. For this youngster especially young girls waste several hours in watching channels such as STYLE 360 to keep an eye on latest fashion. To look cool they smoke, drink wine etc. nd all this they learn by media, imitating their favorite TV actors. Computers and mobile phones instead of using them in a positive way they are being used to boast off. Message packages and late night packages provided by different phone companies like TELENOR, UFONE, WARID, JAZZ etc. and our youth instead of concentrating on their studies they are involved in such activi ties talking and texting all night and sleeping at day time during the class which in the end affect their grades. All of these problems are leading towards the mother of all problems which is FRUSTRATION. Our youth is frustrated because of poverty, unemployment and injustice to them in society. Consequence of this is abundantly drug usage, suicide attempts, terrorism in some cases, rape and increase in crime rates. Depressed youngsters indulge themselves in unhealthy activities which not only harm the society but themselves too. They are either captured by corrupt company of gangsters or they themselves inhabit the company of bad boys who entangle these depressed one’s and spoil their whole life. And if he is the sole earner of family then we could imagine the destruction of lives of his whole family. In this whole scenario youth need health resources, awareness, time for relaxation and affordable healthy entertainment but we are lacking all these things. Our youth should be engaged in such activities which enhance their talent and also contribute towards the development of country. Ministry of youth affairs take such initiatives so that youth is benefited in some way or other. But if the government properly support youth as in developed countries then we will gradually see the progress in economy of our country which will ultimately lead us to prosperity. INSHALLAH. How to cite Issues of Youth in Pakistan, Essay examples

Friday, December 6, 2019

Digitizing Accounts Payable Documents free essay sample

When accounting files are sent to the archives at the end of the year, the portion taken up by the accounts payable documents usually exceeds that of all other documents combined. For some companies with high accounts payable files, it is a major expense to remove all the paperwork, box it up and identify it, and ship it off to a warehouse, from which it must be recalled occasionally for various tasks. Digitizing the documents is a means of avoiding the expense of archiving. Digitizing a document means that it is laid on a scanner that converts the document image into an electronic image stored in the computer database, which can be recalled by anyone with access to the database. To digitize a document, there should be a high-speed scanner available that is linked to a computer network. Documents are fed into the scanner and assigned one or more index numbers or codes, so that it will be easy to recall the correct documents from storage. We will write a custom essay sample on Digitizing Accounts Payable Documents or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page For example, a document can be indexed by its purchase order number, date, or supplier number. A combination of several indexes is the best approach, since one can still recall a document, even if one does not remember the first index number. The document images are usually stored on an optical disk since it can hold enormous amounts of storage space (and digitized documents take up a lot of computer storage space). There will probably be many optical disks to provide a sufficient amount of storage, so the disks are usually stored in a â€Å"jukebox,† which gives the user access to all the data on all the storage disks. Users can then call up the images from any terminal that is linked to the network where the information is stored. There are additional advantages to using digitization of documents. Besides the reduced archiving costs, it is also possible to nearly eliminate the time needed to access documents. With a traditional archiving system, older documents must be requested from a warehousing facility that may require several days to deliver. Even in-house documents may require several minutes to an hour to locate. If customer service is important, and that service is linked to providing rapid access to data, then digitizing documents allows a company to instantly satisfy customer requests for documents by searching the computer fi les for them, no matter how old the documents may be. Another advantage to using digitization is that it avoids having to take out and replace files. Whenever someone removes a file and later returns it, there is a risk that the fi le will be misplaced. Every time a file is misplaced, it will be time-consuming to find it again. By accessing documents through a computer network, there is no need to take out or replace the document—it is always sitting in the same storage location in the computer, and cannot be lost. Yet another advantage is that multiple users can access the same file at the same time. Since it is a digital image, there is no reason why the computer cannot potentially distribute a copy of the digital document to everyone who asks for it, even if they all do so at the same time. Reference link: http://classof1. com/homework-help/accounting-homework-help

Thursday, November 28, 2019

How does the diameter or cross-sectional area of a wire affect its resistance Essay Example Essay Example

How does the diameter or cross-sectional area of a wire affect its resistance? Essay Example Paper How does the diameter or cross-sectional area of a wire affect its resistance Essay Introduction I am going to investigate how the diameter, or gauge, of a wire affects its resistance. In order for me to do this, I will need to find as many different diameters of wire as I can. I will cut each one to a reasonable length (probably about 10cm), then connect it to a battery pack and measure the current and voltage (with an ammeter and voltmeter respectively). From these readings I will calculate the resistance, using the formula: R = V / I (Resistance = Voltage / Current) The scale by which the diameter of wires is measured is called SWG (standard wire gauge) which confusingly goes up as the wire gets thinner. However I shall not use this in my graphs, as I do not know enough about SWG to make any worthwhile observations. The gauge of wires can also be measured by their cross-sectional area. Scientific Theory: How does the diameter or cross-sectional area of a wire affect its resistance? Essay Body Paragraphs Some factors affecting the resistance of a wire are: à ¯Ã‚ ¿Ã‚ ½ its temperature à ¯Ã‚ ¿Ã‚ ½ the metal it is made from à ¯Ã‚ ¿Ã‚ ½ its diameter/cross-sectional area à ¯Ã‚ ¿Ã‚ ½ its length In metals, the structure of the atoms and their electrons means that there is a â€Å"sea† of free electrons (or delocalised electrons) on the surface of a wire that can move around easily, thus conducting the electricity. This is because the outermost shell of a metal atom has a very weak force acting on its electrons. The amount of electrons that can travel determine a material’s resistance. If there are two wires, one twice as thick as the other, but the voltage is the same on both, then (in the case of the thicker wire) there are twice as many electrons available and so the current goes up. This means that, in the case of the thicker wire, the same voltage is being divided by a larger current – therefore the resistance comes out as less. This is the same as if you were t o connect several resistors in parallel in a circuit, as this reduces their resistance too. The greater the cross-sectional area (of a pipe or wire), the less the resistance. This is easily explained in a similar way to water flowing through a pipe. If a pipe has a large cross-sectional area, then more water can flow through at any given time, and it will flow through more easily. I will construct a graph of diameter against resistance and another of cross-sectional area against resistance. I shall expect them to be similar. Range of results: SWG Diameter (mm) 20 0.9 22 0.71 24 0.56 26 0.45 28 0.4 30 0.31 32 0.28 I will refer to the diameter of the wires with their diameter in millimetres as opposed to using SWG (Standard Wire Gauge). According to my scientific theory, this would give my graphs a negative correlation. Prediction: I believe that as the diameter increases, so the wire’s resistance will decrease, thereby showing a negative correlation. This is based on my scient ific theory. Method / Apparatus: various different gauges of wire an ammeter a voltmeter a battery pack crocodile clips Firstly I found the different gauges of wire and cut a 15cm length of each. This was long enough to be useful, but not so long as to be unmanageable. Then I connected the battery pack to the ammeter – this was connected in series – and then the voltmeter – this was connected in parallel. I then used the crocodile clips to connect the wires from the ammeter to the ends of the length of wire. I observed the readings from the meters and recorded them, then used them to calculate the resistance of that particular piece of wire. I repeated this for each gauge of wire. Diagram: Fair Test: In order that my results were as accurate as possible, I made sure that all my wires were made of the same material, Constantan. This alloy (of nickel and copper) maintains the same resistance no matter what temperature it is – I used it so that the results w ould not be compromised by the wire heating up and changing its resistance. My wires were all cut to?2mm of the same length – this was because the length of the wire could affect the resistance, and the factor I was investigating wasn’t length. Table of Results: Run 1 Run 2 SWG Diameter Voltage (V) Amps (A) Resistance R=V/I Voltage (V) Amps (A) Resistance R=V/A 20 0.9 0.25 1.6 0.15625 0.25 1.6 0.15625 22 0.71 0.16 1 0.16 0.175 1.5 0.11666667 24 0.56 0.6 1.45 0.4137931 0.6 1.4 0.42857143 26 0.45 0.8 1.25 0.64 0.8 1.25 0.64 28 0.4 0.9 1.2 0.75 0.9 1.2 0.75 30 0.31 1.1 1 1.1 1.1 1 1.1 32 0.28 1.2 0.95 1.2631579 1.2 1 1.2 Run 3 Average SWG Diameter Voltage (V) Amps (A) Resistance R=V/A Voltage (V) Amps (A) Resistance R=V/A 20 0.9 0.25 1.6 0.15625 0.25 1.6 0.15625 22 0.71 0.17 1.2 0.14166667 0.168333 1.23333 0.13944444 24 0.56 0.6 1.4 0.42857143 0.6 1.41667 0.42364532 26 0.45 0.8 1.2 0.66666667 0.8 1.23333 0.64888889 28 0.4 1 1.2 0.83333333 0.933333 1.2 0.77777778 30 0.31 1 1.1 0.90909091 1.066667 1.03333 1.03636364 32 0.28 1.2 1 1.2 1.2 0.98333 1.22105263 Analysis: From my results I can gather that my prediction was correct – the diameter of a wire does affect its resistance, and in fact (generally) there is a strong negative correlation between the two. I observed this from my graph. I constructed my graph using diameter in mm on the x-axis and Resistance (?, or Ohms) on the y-axis. It showed a negative correlation, but had this weird thing going on at the end – an anomaly. I was able to draw quite a clear curve of best fit. The graph proved my theory correct, because as the diameter increased so the resistance of the wire decreased. Evaluation: I believe the experiment was a success, as it proved my theory correct and my graph showed a clear curve of best fit. However there was an anomalous reading, right at the end. This may have been a mistake in reading the meters, or a mistake in calculating the resistance. To improve the accuracy and fairness of my experiment, I could have done the following things: à ¯Ã‚ ¿Ã‚ ½ used a more reliable power source (the power flow from battery packs weakens with use), à ¯Ã‚ ¿Ã‚ ½ cleaned the connections within the battery pack (corroded or dirty connections can affect power flow), à ¯Ã‚ ¿Ã‚ ½ used more accurate am- and volt- meters (i.e. with a greater number of decimal places), à ¯Ã‚ ¿Ã‚ ½ widen my range of results by connecting the circuit to more than one cell of the battery pack, à ¯Ã‚ ¿Ã‚ ½ cut more lengths of wire from different rolls (one roll alone may not be representative of that particular gauge) as defects etc. may affect the results. We will write a custom essay sample on How does the diameter or cross-sectional area of a wire affect its resistance? Essay Example specifically for you for only $16.38 $13.9/page Order now We will write a custom essay sample on How does the diameter or cross-sectional area of a wire affect its resistance? Essay Example specifically for you FOR ONLY $16.38 $13.9/page Hire Writer We will write a custom essay sample on How does the diameter or cross-sectional area of a wire affect its resistance? Essay Example specifically for you FOR ONLY $16.38 $13.9/page Hire Writer

Monday, November 25, 2019

Funk Essay pdf Essays

Funk Essay pdf Essays Funk Essay pdf Paper Funk Essay pdf Paper Funk Music is musical genre that originated in the mid 1 sass when African American musicians mixed elements of Soul, Blues, Piccadilly Rock and Jazz o create a new sound. Funk doesnt focus on melody or harmony like genres before them, instead its intent is the rhythmic quality within syncopated value on various instruments. Funk traditionally has no harmonic pace, this divides it from Ran and Soul. It instead uses an improvisational technique, to vamp, which is to remain on a chord for an intro for a number of bars before proceeding to the tune. This draws in elements of improvisational jazz, to which where the chords where usually taken from the Bebop Genre belonging to Jazz. Funk musicians where trained in these genres and often deed these jazz extensions to their chords and solos. Like much African-influenced gene rest, funks main specialist is complex groove played on both new technology and older/traditional instruments. These included the organ, drums, horn section, electric bass and electric guitar with new modulating effects. Rhythm The Rhythm for funk dates back to Sahara African music tradition, where they played with on and off beat structure to which we call syncopation. This style had a revival in new Orleans in sass before James Browns and his rhythm section introduced it country-wide with great effect Funk Creates intense Groove by using Strong Guitar riffs and Bass Lines. A big Funk characteristic is to have the bass line as the centerpiece for the entirety of the song. It may sequence, may remain using the same notation or change the interval relation entirely but keep the same rhythm. : Guitarist typically played heavily rhythmic and percussive accompaniment using electrically modified effects like Way-way or Phases. Harmony As mentioned earlier, Funk uses the same extended chords found in bebop jazz, such as chords with added sevenths and elevenths, or dominant seventh chords with altered ninths. However, unlike bebop jazz, with challenging harmonic pace modulation, funk virtually abandoned chord changes, creating static single chord accompaniment over a complex, driving rhythmic feel. More skillful funk players adapt these influences effectively to demonstrate spacious advance solo techniques to add to the experimental essence of Funk The chords used in funk songs typically belong to a Dorian or myocardial mode, as opposed to the major or natural minor tonalities of most popular music. Melodic content was derived by mixing these modes with the blues scale. In the sass, jazz music drew upon funk to create a new submerge of jazz-funk, which can be heard in recordings by huge artists like Miles Davis and Herb Hancock. Funk truly was a groundbreaking wave of new music, by taking out elements of past popular and traditional forms of music and reinventing an addicting sound that lead a counter-culture of youth across America. Funk was a new way for musicians to express themselves easily, as well as gathering large amounts of popularity from the use of catchy danceable rhythms. The importance of rhythm and simplistic melody has influenced music to this date, realizing that music can be popular and remarkable just as its free and expressive.

Thursday, November 21, 2019

Case Study Example | Topics and Well Written Essays - 1500 words - 10

Case Study Example The purpose and the competitive strategies that give an organisation an edge over the competitors are known as the strategies of the organisation. Goals are sometimes stated in the company intent that is published at the start of a year. The strategies define the action plan that is adopted by the organisation so as to efficiently allocate the available resources and achieve the goals. Thus the scope of operations and the relationship that exists between the employees, competitors and customers are defined by the goals and strategies of the company. The employee turnover rate at Printzhof Press was very low and the leaders helped to achieve that end. The sales model of Printzhof was different than its competitors. Whereas most other publishing houses had â€Å"sales rep† who were in charge of contacting different professors and customers in a wide range of disciplines, Printzhof had â€Å"publishing rep† that focused on limited number of disciplines. Thus Printzhof used the niche strategy and catered to a lesser number of disciplines. Their publishing reps made it a point to attend a number of professional events that would inform them about the latest trends in teaching and research. After detailed analysis they would get in touch with the experts who would like to develop a working relation with the publishing house. Structure of a company is the hierarchical structure of the lines of authority, rights, duties and communications that exist in the same. It helps one determine the roles, responsibilities and power that exists in an organisation and the flow of information in between the different levels. It also helps an organisation identify each post, the functions that are expected from that and to whom that person holding the post would report to. This organisation structure assists an organisation in achieving the goals that have been set by the same. Generally in a centralised organisation

Wednesday, November 20, 2019

Free Healthcare Essay Example | Topics and Well Written Essays - 1500 words

Free Healthcare - Essay Example (explanation) 2. The goal of free healthcare perfectly harmonizes with the ideals enshrined in the American constitution and the ethical moorings of the American society. Absence of free healthcare is un-American and un-democratic and interferes with the objective of social justice. (explanation) B. Absence of free healthcare exposes the lower strata of the American society to excessive stress and anxiety, thereby deteriorating its quality of life. 1. Citizens hailing from the weaker sections of the American society often have to face unwarranted stress and apprehension because of being unable to afford proper healthcare for themselves and their family members. (explanation) 2. Even if the poor Americans somehow manage to afford medical remedies for their health problems, it puts excessive burden on their financial resources and curtails their ability to allocate money for other basic necessitates like housing, nutrition, education and sanitation. (explanation) C. Absence of free healthcare is making America more vulnerable to pestilence and epidemics. 1. Many people being unable to afford medical care for their health problems simply carry on with their lives, without coming under the scrutiny of any health professional or agency. Presence of such unattended patients with potential infectious and contagious diseases jeopardizes the safety and well-being of the entire society. (explanation) 2. For example, the recent proliferation of Swine Flu in North America made it mandatory to quarantine and isolate... 2. The goal of free healthcare perfectly harmonizes with the ideals enshrined in the American constitution and the ethical moorings of the American society. Absence of free healthcare is un-American and un-democratic and interferes with the objective of social justice. (explanation) 1. Citizens hailing from the weaker sections of the American society often have to face unwarranted stress and apprehension because of being unable to afford proper healthcare for themselves and their family members. (explanation) 2. Even if the poor Americans somehow manage to afford medical remedies for their health problems, it puts excessive burden on their financial resources and curtails their ability to allocate money for other basic necessitates like housing, nutrition, education and sanitation. (explanation) 1. Many people being unable to afford medical care for their health problems simply carry on with their lives, without coming under the scrutiny of any health professional or agency. Presence of such unattended patients with potential infectious and contagious diseases jeopardizes the safety and well-being of the entire society. (explanation) 2. For example, the recent proliferation of Swine Flu in North America made it mandatory to quarantine and isolate the infected individuals.

Monday, November 18, 2019

Achieving Sustainable Development in Construction Essay

Achieving Sustainable Development in Construction - Essay Example But it must be recognized that in modern world, there is greater emphasis on efficient infrastructure as far as construction and development are the two issues of concerns (HM Government, 2008). Therefore, many stakeholders have postulated that construction industry has a big role to play in ensuring that infrastructures are built in the most innovative way and in the most cost-effective way. On overall, it must be noted that, construction industry has a big impact on the way resources are used and utilized, and it is from this aspect that advocacy has increased in recent times to ensure a sustainable construction industry is designed and developed (Clements-Croome, 2004). The government of UK has in the recent past come out strongly with a message that sustainable development has to take place firmly in the construction industry. As a result, it is clear today that the impact that emerges to the built environment as a result of construction plays a great role in driving or accelerat ing sustainable growth and development (HM Government, 2008). Sustainability and Government Effort Since emergence of sustainable development goals, efforts by different governments and agencies have been directed towards development initiatives, which are undertaken in such a way that, the future generation is not sacrificed with the kind of development initiatives undertaken now. ... reover, the government is keen on promoting environmental conservation, where the aim has been directed at reducing the greenhouse gas (GHG) emission (Department for Business Innovation and Skills, N.d). More importantly, the UK government has made it clear that efforts of all stakeholders should be directed at maintenance of high and stable opportunities of employment, while at the same time, ensuring sustainable economy is promoted (Department for Business Innovation and Skills, N.d). Therefore, the paramount aim or goal here for the government is to promote sustainable development of economic, social, and environmental issues in the most responsible way, and this does not isolate or subtract construction industry (Myers, 2011). Moreover, effort has to be made and identify how the government of UK has played its role in the development of sustainable construction industry in the country (Department for Business Innovation and Skills, N.d). Therefore, some of the government initiati ves that the government has developed include developing Enterprise Strategy and the Innovation White Paper, which the government has collaborated with the industry players to ensure that sustainability in construction industry remain the major driving focus. Construction industry in UK Construction industry in UK continues to realize bountiful output which at the moment is estimated to be about 10 billion pounds (HM Government 2008). At the same time, it accounts for about 8% of Gross Domestic Product (GDP) and is responsible in creating numerous employment opportunities. It is recognized that both the public and private sector are involved in construction sector, a situation that has seen immense sprouting of commercial buildings, homes and diverse infrastructures. As a result,

Friday, November 15, 2019

The Roles Of Design User Interfaces

The Roles Of Design User Interfaces Projects of different sizes have different ways and requirements on how the people are organized. In a small project, little organization structure is needed. There might be a primary sponsor, project manager and a project team. The Designer is responsible for understanding the business requirements and designing a solution that will meet the business needs. There are many potential solutions that will meet the clients needs. The designer determines the best approach. The work of the designer is then handed off to the programmers and other people who will construct the solution based on the design specifications. Terms of appointment of design team and contractors should clearly identify roles and responsibilities. Qns:2 What are the roles and responsibilities of the content creators in a project team? Ans:- Content creation can start when the editors are prepared, and when the technical environment is sufficiently ready. The content work will then most likely continue beyond the technical delivery and acceptance of the Web site. Content can be of many kinds but is typically text and images in different formats web pages, documents , sounds, animations etc.A person who is responsible for entering content for a subject matter expert or for a group of subject matter experts. Content contributors ensure content is up-to-date and adheres to the Writing Style Guide and Graphic Standards. Qns:3 What are the roles and responsibilities of the programmers and coders in a project team? Ans:- A programmer, computer programmer or coder is someone who writes computer software.The term computer programmer can refer to a specialist in one area of computer programming or to a generalist who writes code for many kinds of software. A programmers primary computer language is often prefixed to the above titles, and those who work in a web environment often prefix their titles with web. The term programmer can be used to refer to a software developer, software engineer, computer scientist, or software analyst. The programmer builds the web sites functionality the things it can do. A web project may need just one or a number of different programmers, depending on the size of the site, what you want it to do, and which programming languages are required to make it work. Qns:4 What are the roles and responsibilities of the information architects in a project team? Ans:- In the Web industry, the architect title has long been hogged by Information Architects, and the Web Architect is generally called Tech Lead. That name is problematic, however, because it implies that the lead has evident authority on the development team, when the reality is often one of much responsibility, little authority: the tech lead seldom has authority by virtue of being a manager.Architects provide services that are designed to eliminate the most common causes of IT project failure. They work with management, business and IT staff to build solid project teams. Qns:5 What is the relationship between the technical and creative aspects and requirements of interactive media projects? Ans:- It allows to work in teams and produce an interactive media project that culminates in Both technical and creative aspects will be emphasized. Its communication,team work and literacy skills sufficient to interpret and clarify project specifications. Its roles and responsibilities of project team members e.g. designers, content creators, architects, programmers and coders. Sound understanding of the relationship between technical and creative aspects and requirements of interactive media projects. Qns:6 List 3 of the issues and challenges that arise in designing user interfaces? Ans:- 3D user inter-faces provide an attractive approach to support the user. Upcoming interaction techniquesenable faster and more intuitive interaction in comparison to standard interfaces. As 3D UserInterfaces gain more capabilities, new challenges and problems arise. But in the course of time upcoming technologies extended the standard parts of interfaces, so human-computer interaction in which the user tasks are performed directly in a 3D spatial context are enabled. This means the user interacts within the computer environment. Hence, in terms of 3D interaction the user is not interacting through an interface, he can actually be seen as a part of the interface. Qns:7 What are the principles of the visual design and communication, including user -centered design principles? Ans:- When evaluating a current user interface, or designing a new user interface, it is important to keep in mind the following experimental design principles: user-centered design (UCD) is a modern, widely practiced design philosophy rooted in the idea that users must take center-stage in the design of any computer system. Users, designers and technical practitioners work together to articulate the wants, needs and limitations of the user and create a system that addresses these elements. Often, user-centered design projects are informed by ethnographic studies of the environments in which users will be interacting with the system. This practice is similar but not identical to Participatory Design which emphasizes the possibility for end-users to contribute actively through shared design sessions and workshops. Principles of User Interface Design: these are seven principles that may be considered at any time during the design of a user interface in any order, namely Tolerance, Simplicity, Visibility, Affordance, Consistency, Structure and Feedback. Qns:8 What are the technical parameters of various platforms and how this impact on user interface designs? Ans:- Responsible for assuring that user interfaces to all HHS products and services designs, prototypes, and specifications across multiple platforms while working across multiple platforms; design and conduct usability tests at various stages The work of the incumbent will impact information dissemination . Being hardly more than data enclosures in XML files, the technical concept of podcasting and RSS feeds is very simpleandhardly anything that could be calledinnovative purely in atechnologicalsense.Podcasts, as well as RSS (often calledReally Simple Syndication but various alternative meanings also exist:Every aspect of the users interaction with a product, service, or companythat make up the users perceptions of the whole. User experience designas a discipline is concerned with all the elements that together make upthat interface, including layout, visual design, text, brand, sound, and interaction. Qns:9 What are the typical formats and techniques for documenting user interface designs? Ans:- In software engineering, a design pattern is a general reusable solution to a commonly occurring problem in software design. A design pattern is not a finished design that can be transformed directly into code. It is a description or template for how to solve a problem that can be used in many different situations. Object-oriented design patterns typically show relationships and interactions between classes or objects, without specifying the final application classes or objects that are involved. Many patterns imply object-orientation or more generally mutable state, and so may not be as applicable in functional programming languages, in which data is immutable or treated as such.Design patterns reside in the domain of modules and interconnections. At a higher level there are architectural patterns that are larger in scope, usually describing an overall pattern followed by an entire system.[1] Qns:10 What are the OHS standards as they relate to working for periods of time on computers? Ans:- Occupational Health And Safety:- Their workstation set up correctly, they are working ergonomically soundly but they seem to forget that working firms and companies must comply with the laws, standards and regulations which .. from a series of events over a period of time.

Wednesday, November 13, 2019

philosophy :: essays research papers

Chapter’s 3 & 4 Synopsis Chapters 3 & 4 Synopsis I believe the assumption of an external reality is the assumption that there is a real world that is external to our mind and senses, and that it exists whether or not we as observers exist, and whether or not we are observing it. This assumption cannot be proved because all of our perceptions, without exception, are mental images, and we have no means to go beyond our mental images. It is one we all commonly make without even thinking about it. In the military, we assume the office and the computer in it are there after we leave work at the end of the day and will be there when we arrive at work in the morning. When we head home at the end of the day, we assume that our house or apartment will be there when we arrive, and that it continued to be there in our absence after we left in the morning. We assume that our friends, relatives, and acquaintances are there whether we can see and talk to them or not, and whether or not we are thinking about them. We assume that our parents exist ed before we were born, and that many of the people we know will be alive after we die. So many of our everyday experiences repeatedly confirm this assumption that most of us hardly question it. It is an assumption that has enormous survival value: we know that a speeding car can kill us while we are crossing the street absorbed in our thoughts and unaware, that a stray bullet can instantly obliterate our consciousness without warning, or that we can die from an external agent such as a virus, a bacterium, or a poison. The assumption of external reality is necessary for science to function and to flourish. For the most part, science is the discovering and explaining of the external world. Without this assumption, there would be only the thoughts and images of our own mind (which would be the only existing mind) and there would be no need of science, or anything else. In addition to the assumption of an external reality, we also make the assumption that this reality is objective. Thi s is repeatedly confirmed by our daily experience as well as by scientific observations. I also learned that objectivity means that observations, experiments, or measurements by one person can be made by another person, who will obtain the same or similar results.